Girths and Girth Converters by Crest Ridge Saddlery

We designed the Supra Cinch to help improve saddle stability for round, mutton-withered horses without galling or over-tightening your cinch.  The Supra Cinch also provides additional saddle stability for those of us who aren't as spry as we once were and need a little extra time to swing a leg over while mounting.  Our Supra Cinch is an updated version of a packer's cinch. We use only high quality materials, reinforced stitching and stainless steel hardware to create a durable and safe cinch.  Instructions for using the Supra Cinch are at the bottom of this page.

The Supra Cinch designed by Crest Ridge Saddlery

Supra Cinch		Please Specify 28"-  38" In this cinch you need to order 2" LARGER than your regular girth. Note: The Supra Cinch will not work on saddles equipped with rear in-skirt (slotted) rigged saddles. Special order sizes available for $87.30--call 1-417-644-0091 for special order sizes.	$72.75	Buy Now
Rear Flank Set		The flank set (3 pieces together) on it's shortest setting is 58 inches, and it lengthens to 72 inches. The off-billets are 1 and 1/4 inches wide and the flank itself it 3 inches wide. Roller buckles provide for easy adjustment and the center buckle easily attachst to the girth. This sturdy set is double-sewn with nylon thread for strength, and contains stainless steel buckles with keepers, as well as reinforced copper rivets at all stress points.	$44.50	Buy Now
Western to English Conversion Billets		These custom-made Western to English Billet converters allow you to use English-style billets on your Western saddle.  The buckles are stainless steel.  These English style billets offer the cinching ease of an English saddle with the comfort of a Western saddle. We custom make each set of these as they are ordered, so please allow at least two weeks before the billets are shipped.	$55.00	Buy Now

Instructions for using the Supra Cinch

Your Supra Cinch comes with 1 cinch and 1 nylon near side (long tie) and 3 off side billets (short)

1.   Remove all the nylon straps from your Supra Cinch.

2.   Place the longest strap on the front near side (Left) ring of your current saddle.

3.   Place one of the shorter straps on the near side (Left) Rear Rigging ring.

4.   Place another of the shorter straps on the off side (Right) front right of the saddle.

5.   Place the remaining short strap on the off side (Right) rear ring.

6.   Place saddle on the horse.  Attach the off side (Right) Front and Rear straps to the Supra Cinch so that the center in directly centered under the horse.

7.   Draw up each strap on the cinch so that each is tightened evenly.

8.  As with any cinch, periodically check tightness during your ride.